Organic Pigment Manufacturer in India

Start by identifying your binder system (water-based / solvent-borne / polymer), maximum processing temperature (60-300°C), required Blue Wool lightfastness (1-8), and any chemical or regulatory requirements (REACH, RoHS, food contact). Match these to a candidate pigment's datasheet, request a free 50-100g sample, run a pilot batch, then place a bulk order against the qualified specification.

Monoazo pigments (PY1, PY3, PY74, PR2, PR3) are cost-effective bright colours for inks and architectural paints. Diarylide yellows and oranges (PY12, PY13, PY83, PO13, PO34) offer higher strength for inks, plastics and masterbatch. Benzimidazolone grades (PY151, PY154, PY180, PO36, PO64) are our high-performance line, with the heat stability and lightfastness needed for automotive, powder coatings and engineering plastics.

For exterior architectural paints, automotive refinish, and infrastructure coatings, you need a Blue Wool lightfastness rating of 7-8 (ISO 105-B02). Recommended grades from our range: PY154 and PY151 (benzimidazolone yellows), PY83 (diarylide HR), PY174 (greenish yellow), and PR170 (premium naphthol red). These hold shade through years of direct outdoor sun exposure.

Yes. Every Kanani Pigment & Paste grade is REACH compliant and free from the 24 banned aromatic amines under EU Directive 2002/61/EC. All grades are also RoHS compliant with no detectable lead, cadmium, mercury, or hexavalent chromium above threshold limits. Compliance declarations and Safety Data Sheets ship with every consignment.

For HDPE, PP, PVC and engineering polymers processed at high temperatures, choose heat-stable benzimidazolone grades such as PY154, PY151, PY180, PO36 and PO64, along with diarylide HR PY83. Lower-heat monoazo grades like PY3, PY14 and PY74 are better suited to inks and architectural paints than high-temperature masterbatch. Share your processing temperature and we will recommend the right grade.

Most popular grades are available from 25 kg minimums. Standard grades that we maintain in buffer stock typically ship within 7-10 days of order confirmation. Custom grades may require 4-6 weeks. We provide free 50-100g evaluation samples for any grade so you can qualify before bulk ordering.

Yes. Sample and bulk are produced under identical specifications and batch-tested against the same reference standard via spectrophotometer (target ΔE less than 1.0). What you qualify in your lab is what arrives in the bulk container. Every batch ships with a Certificate of Analysis documenting actual measured values.

Yes. We export to 30+ countries with full export documentation: Commercial Invoice, Packing List, Certificate of Origin, Bill of Lading or Air Waybill, Certificate of Analysis (COA), Safety Data Sheet (SDS), REACH compliance declaration, RoHS certificate, and any country-specific certifications. Active markets include India, UAE, Saudi Arabia, Vietnam, Indonesia, Thailand, Egypt, Nigeria, Kenya, and South Africa.